KHT5500 型液压动力钳适用于油田修井作业中上卸 23/8"-31/2"钻杆、31/2"-41/2"油管及 41/2"-51/2"套管的一种开口式动力钳，主、背钳都采用三颚板夹紧机构，保证对管柱最小伤害，其作业效率高，大大降低工人的劳动强度，并能提高管柱螺纹连接质量，减少由于修井作业不当引起的管柱事故等。
The front two-jaw-plates of the master tong are in the swing structure and the back jaw plate is the roller-climbing structure. The assembly and disassembly is very convenient. The optimum tangent-diameter ratio design ensures reliable clamping and easy slope retreating. The back tong is the three-jaw-plate structure pushed by hydraulic cylinder. The structure is simple and the clamping is reliable;
Four-gear rotation is adopted for large speed regulation range. And the rated torque is large;
It has the braking mode with braking staple. The braking torque is large. The operation is simple. And it is convenient for repair and replacement;
With the open large gear supporting structure, hardness and rigidity of open large gear is enhanced considerably;
The shell is made of steel plate with high hardness. The overall hardness is good. Various jaw plates are made with fine casting and forging process. It has beautiful appearance and high hardness;
Hydraulic torque indicator is provided. And installation interface of turning torque instrument is provided for computerized management.