KHT9625 型套管动力钳
创建时间：2022-04-07 15:24
KHT9625 型套管动力钳适用于油田矿场下套管作业中上卸管柱丝扣，是适用于最大套管管径95/8″的一种重型套管钳，主、背钳都采用三颚板夹紧机构，保证对管柱最小伤害，其作业效率高，大大降低工人的劳动强度，并能提高套管柱螺纹连接质量，减少由于下套管作业不当引起的套管柱事故等。
넶浏览量：0
特点/Characteristics:
主、背钳都采用三颚板夹紧机构，保证了对管柱的最小伤害。主钳前两颚板为摆动式，后颚
板为滚子爬坡式，拆装极为方便，最佳的切径比设计，保证了夹紧可靠，退坡容易；背钳为液缸推
动夹紧的三颚板结构，结构简单，夹紧可靠；
Master, backup tong are all use three-jaw clamp system, ensure the minimum damage to the tube pillar. Two front
jaw of master tong is swing type, rear type is roller climbing type, disassembling is very convenient, The design of best
cutting diameter can ensure the reliable clamping and easy back climbing; the master tong is liquid push climbing
three-jaws structure, which is simple, and reliable;
采用四档转速，调速范围广，额定扭矩大；
Four gear speed used, wide range of speed adjustment, rated torque high;
刹带制动方式，制动力矩大，操作简单，便于维修和更换；
Brake belt assembly, easy to operate and convenient to maintain and replace;
开口大齿轮支承结构，使开口大齿轮强度及刚度大幅提高；
Open gear supporting structure, improving the strength and rigidity.
壳体采用高强度钢板，整体强度好。各颚板用精密铸造或锻 造工艺，外形美观，强度高；
High strength steel plate used on the shell，increasing the strength. The jaws are cast with precise technology, artistic and strong.
带有液压扭矩指示表，并有圈数扭矩仪的安装接口，便于实 现计算机管理。
Hydraulic torque indicator is provided. And installation interface of turning torque instrument is provided for computerized management.
